It’s been sitting in my bedroom for ten months waiting to be installed.
Only had to go to the hardware store for extra parts once.
It’s been sitting in my bedroom for ten months waiting to be installed.
Only had to go to the hardware store for extra parts once.
Get better bolts. Replace them everytime. You’ll have to cut them down with a hack saw. They have many different bolts. But a decent set will have a retaining washer. Either plastic or another nut and washer. You set those onto the flange and then they don’t move around. The second set of nuts is then used to bolt the toilet down.
Alternatively you can try a neoprene or rubber gasket as you will not have to deal with the messy wax. Just make sure you always clean both sides of the flange and base of the toilet for a positive seal. Wax is tried and true for me but in this case a rubber gasket would be warranted.
bad advice. it’s not a question of if they leak, but when.
See, I have been replacing the bolts every time. And the seals I’ve been using come with plastic retaining washers, purportedly to hold the bolts in place—they don’t. Maybe it’s an issue with my anchor flange.
Sure. Try an extra nut and washer and bolt them to the flange. 100% that flange should be secured to the subfloor with no movement.
Great, this must be toilet troubles week. Now I know what to do when the person responsible for fixing things does their usual cheap - ass fly-by.
Why have you needed to replace the bolts each time?
I wouldn’t say I needed to, but I was replacing the seal every time, and the seals come with a new set of bolts, so I figured I might as well. It’s no bother, really.
Ah, I see. I’ve yet to replace a toilet seal.