Does the clock come on with the key? Or do you have to push in the volume knob to make it come up? If it’s the latter, there’s a yellow wire behind there that still isn’t getting power.
Almost none of the 2nd gen S-10 family need ignition keys at this point. They all wear out. Power up that yellow wire however you like if you want some tunes.
So, if I’m understanding you correctly, I should be getting battery voltage from the yellow wire when the ignition switch is in the accessory or running positions?
If that’s the case, well holy fuck that gives me some dead-on clues where to start looking next!
Correct. Orange wire is 12v constant and the yellow is 12v switch ignition. Brown wire is ground, but that’s kinda optional; it will pull ground from the antenna plug instead.
Dude, guess what our truck is missing? The dome light. Guess what color wires hang from where it used to be? Black, White, Orange, Yellow…
You wanna take any guess where I installed a toggle switch? Right under the rear view mirror. Now we got working radio and windshield wipers!
Man your advice has saved my sanity for the month, I had folks telling me to check the control module and even replace the entire wire harness, while I’m like fuckall with that, I’ll seek a simpler solution first.
Apparently its just a fault of the ignition switch itself, which isn’t really that big of a surprise, but I would have been chasing wild geese and getting nowhere fast. Your advice got the accessory systems running again! 👍
Now, next goal is to figure out what’s up with the horn, that still don’t work…
Dude, guess what our truck is missing? The dome light. Guess what color wires hang from where it used to be? Black, White, Orange, Yellow… You wanna take any guess where I installed a toggle switch? Right under the rear view mirror. Now we got working radio and windshield wipers!
Does the clock come on with the key? Or do you have to push in the volume knob to make it come up? If it’s the latter, there’s a yellow wire behind there that still isn’t getting power.
Gotta push the volume knob.
This truck doesn’t require a key…
Almost none of the 2nd gen S-10 family need ignition keys at this point. They all wear out. Power up that yellow wire however you like if you want some tunes.
So, if I’m understanding you correctly, I should be getting battery voltage from the yellow wire when the ignition switch is in the accessory or running positions?
If that’s the case, well holy fuck that gives me some dead-on clues where to start looking next!
Correct. Orange wire is 12v constant and the yellow is 12v switch ignition. Brown wire is ground, but that’s kinda optional; it will pull ground from the antenna plug instead.
Dude, guess what our truck is missing? The dome light. Guess what color wires hang from where it used to be? Black, White, Orange, Yellow…
You wanna take any guess where I installed a toggle switch? Right under the rear view mirror. Now we got working radio and windshield wipers!
Man your advice has saved my sanity for the month, I had folks telling me to check the control module and even replace the entire wire harness, while I’m like fuckall with that, I’ll seek a simpler solution first.
Apparently its just a fault of the ignition switch itself, which isn’t really that big of a surprise, but I would have been chasing wild geese and getting nowhere fast. Your advice got the accessory systems running again! 👍
Now, next goal is to figure out what’s up with the horn, that still don’t work…
Nice! That is some proper bodging.